Instructions for installing a bathroom light, Zomorod Noor, code 300

Required equipment:
1. Lamp and accessories
2. Drill and bit size 7
3. Four-point screwdriver
4. Screws and roll of license plate
*This product has IP65 and is designed for environments without sunlight*

How to install:
1. Open the light strip from the sides by pushing it outwards slightly.
2. Use a square screwdriver to unscrew the two screws behind the light.
(Due to the waterproof nature of the product, a gasket is installed behind the door)
(The product has two long screws for surface mounting)
3. Mark the hole location on the support on the desired surface and fasten it to the surface with a drill, screws and a flat plate.
4. Connect the phase and neutral input to the product terminal
5. After installing the product on the surface, easily install the strip on it.